Built to cover a wide range of industries and suitable for small bench assembly through to heavy-duty engineering, the new POP® Avdel® Proset XT range features four riveting tools, that have all riveting requirements covered.
The ProSet XT can be used in virtually any workstation configuration. The left or right 90° hand mounted swivel air fitting allows for maximum versatility by providing additional flexibility, conserving energy, and reducing operating costs.
The innovative, ergonomic design of the ProSet XT Range ensures maximum user comfort and efficiency. The quick vacuum filter access of the MCS means undesirable air exhaust can be directed away from the operator.
With the Mandrel Collection System spent mandrels are instantly collected and with the quick-disconnect system, disposal takes no time keeping work areas safe and clean with minimal downtime.
The range is optimised for high volume efficiency and requires no tools for routine maintenance and cleaning. Both front and rear end components can be serviced in minutes without removing the tool from the production line. The patented quick-disconnect nose housing and jaw ensure rapid cleaning and maintenance of the front end without the need for any tools.
“The Proset XT range replaces the existing Avdel Genesis and POP ProSet tools. With new design and improved usability combining the best features from previous tools, the ProSet XT tools are lighter, faster and more powerful than the tools they replace,” says Servee Paes, product manager for POP Avdel power tools.
The compact, lightweight and reliable ProSet XT1 is amongst the highest force to weight ratio blind riveting tool in the industry. The ProSet XT1 will set 2mm micro rivets, 2.4mm (3/32 inches) and 3.2mm (1/8 inches) diameter rivets in all materials, and up to 4mm (5/32 inches) all-steel open-end rivets.
The ProSet XT2 sets a new standard for pneumatic rivet tools. Designed specifically to set a wide range of breakstem rivets, this tool delivers 8.9kN of pull force with an outstanding force to weight ratio of 7.18kN/kg.
The ProSet XT2 will set 3mm and 3.2mm (1/8 inches), 4mm (5/32 inches), 4.8mm (3/16 inches) and 5mm diameter rivets in all materials including high-strength structural stainless steel rivets. The ProSet XT2 will also place up to 7mm sealing plugs with an additional nose assembly.
The ProSet XT3 can be used in a variety of applications, setting a large range of breakstem rivets, lockbolts and sealing plug sizes. The extremely large stroke of 26mm allows the placement of longer rivets like Monobolt and Interlock in one set.
The ProSet XT3 will set 4mm (5/32 inches) to 6.4mm (1/4 inces) diameter rivets in all materials. It will also set 4.8mm (3/16 inches) diameter lockbolts and up to 9mm diameter sealing plugs with additional nose assembly.
The ProSet XT4 is the strongest tool of the ProSet family. With 23kN the XT4 delivers the highest pull force in the range but weighs in at just about 2 kg. As well as structural breakstem rivets, the high capacity of the XT4 also allows installation of Avdelok, Maxlok and Avtainer lockbolts. The tool features an ultra high tensile piston rod for maximum tool life and a hydraulic damping for smooth operation.
The ProSet XT4 will set 4mm (5/32 inches) to 6.4mm (1/4 inches) diameter rivets in all materials. It will also set 4.8mm (3/16 inches) to 6.4mm (1/4 inches) diameter lockbolts and 6mm to 12mm diameter sealing plugs with additional nose assembly.
All four tools in the range offer a range of useful features including a high force to weight ratio, quick disconnect nose housing and jaw case for easy maintenance and service, clear quick release mandrel collector bottle to reduce downtime, and integral exhaust valves for fast setting cycles. Each tool has lightweight construction with balanced handling, comfortable low activation force trigger and an adjustable vacuum exhaust direction.
To improve economy and safety, all four tools also include an air isolation switch during MCS removal, on/off, left or right swivel air fitting minimises air consumption and noise and conserves energy and piston bearing rings to ensure maximum robustness and tool life. The rubber bases have also been designed to avoid damage.
Having joined the magazine in 2012, Claire developed her knowledge of the industry through the numerous company visits, exhibitions and conferences she attended both in the UK and abroad.
Responsible for social media and the online platforms, Claire prides herself on keeping readers well informed and up to date with the latest industry news.