Pre-mixed and frozen resins 19 September 2016

Two component adhesives undoubtedly provide a strong, reliable bond, however some end users may be put off by the hassles of the manual mixing process.

When mixing the two components, the reaction typically begins instantly, meaning that users must work ‘against the clock’ to ensure the mixed adhesive does not become so viscous that it cannot be applied, and also avoid decreasing the bond strength due to the diminished wetting of the surface.

Special care must also be taken during the mixing process to maintain the prescribed ratio of resin and hardener, since even a small deviation from the specified mix ratio can prevent the adhesive from curing properly. Furthermore, because of the precise mix ratios required, a number of two component systems cannot be accurately proportioned in the small sized batches needed for production.

To counter this problem, larger batches must be prepared where only a small percentage of the material is actually utilised, and this results in a considerable amount of waste.

By choosing pre-mixed and frozen resins (PMF), these problems and hassles are completely eliminated as the end user only needs to thaw and dispense the material. PMF refers to the blending, packaging and freezing of two component resin or catalyst systems, and offers the ultimate in convenience and reliability.

Utilising the pre-mixed frozen service available from Ellsworth Adhesives Europe, end users need not worry about human error on their production line – the experts at Ellsworth will mix, de-gas, weigh and package the two component system, before flash freezing the package and contents at -80ºC.

Upon receiving the pre-mixed frozen product, the customer’s only responsibility is to store the goods in a freezer with temperature no lower than -40ºC. The PMF product will arrive in an insulated carton and full instructions for handling, thawing and storage are provided.

During the mixing process of PMF packages, it is possible to modify the resin and catalyst systems with the addition of a third or fourth ingredient. Options include precision glass spacer beads, adhesion promoters, pigments, fluorescent indicators and fillers – all of which have the potential to enhance the physical properties of the final material.

Another major perk of using pre-mixed frozen resins is increased productivity on the production line. With a regular supply of PMF, production need not be halted or held up while fresh material is dispensed, mixed and distributed. The need for cleaning time is also virtually eliminated since there are no messy containers or sticky bench tops to be considered.

Ellsworth Adhesives comments: “The benefits of PMF resins are unquestionable and we are one of a few companies in the global adhesives market offering this unique product and service.”

 

 

Claire Aldridge Deputy Editor t: +44 (0) 1727 743 889

Having spent a decade in the fastener industry experiencing every facet – from steel mills, fastener manufacturers, wholesalers, distributors, as well as machinery builders and plating + coating companies, Claire has developed an in-depth knowledge of all things fasteners.

Alongside visiting numerous companies, exhibitions and conferences around the world, Claire has also interviewed high profile figures – focusing on key topics impacting the sector and making sure readers stay up to date with the latest developments within the industry.